|
PRO POWER PACK SPECIAL
Surface Prep and Substrate Stabilization™
4000 PSI, 4.0 GPM and 13.0 HP
 |
Honda Engine (2 Year Warranty)
Pump: CAT (5 Year Warranty)
16000 Cleaning units
Chemical Injector
Adjustable Pressure
Low Oil Shutdown
10" Tubed Pneumatic Tires
Dual Padded Shock Absorbing Feet
50 FT Steel Braided Hose
3 Quick-Connect Spray Nozzles
1 Quick-Connect Chemical Nozzle
Thermo-sensor
4,000 PSI Trigger Gun & Wand
Aircraft Aluminum Frame (Lifetime Warranty)
Direct drive
Assembled and Tested in the USA
|
Large Rotary Nozzle
 |
This tool is made of high quality ceramic that will extend the life of the tip. Handles any pressure up to 4000PSI
Great Time Saver!
Max Pressure: 4,000 PSI
Max Temperature: 130º F
Max Flow: 4.0 GPM
Inlet: Water Filter with 1/4" Quick-Connect (attaches to the tip of the wand)
Nozzle: Ceramic
Weight: 1.10 lbs.
|
20" Stainless Steel Whirl-A-Way
 |
Tri-arm high pressure washer surface cleaner cleans 30 percent more efficient in 30 percent less time: 20" diameter; 4 non-marking casters; 20" diameter nylon brush skirt.
Max Pressure: 4,000 PSI
Max Flow: 8.0 GPM
Max Temperature: 180°F
Rotary arm: Tri-rotary arm cleaners
Brush: Nylon
Color: Stainless Steel
Weight: 38 lbs.
|
Wet Sand Blaster
 |
The most effective method for removing graffiti is sand blasting. The West Sand Blaster combines high pressure water with sand to strip coatings, baked on grease, rust and much more. Use dry silica sand, baking soda or washed and dried river sand. Place the metal probe into the sand, attach the blast head to the tip of the pressure washer wand and see the stains disappear.
Heavy Duty Wet Sand Blaster
Works with 4,000 PSI @ 10.0 GPM. Includes sand blast head, probe, 3/4" Hose, Hose clamp and 1/4" plug |
ROTARY FLOOR MACHINE
 |
At 1.5 hp and 175 RPM this floor machine is the smoothest operating in the industry. Resurfacing contractors prefer our recommended floor machines for their easy start up. This unit features a patented rotationally molded housing that absorbs the shock and torque normally associated with running a floor machine. The 17” model is made specifically for sanding and grinding jobs. The ultra high output 1.5 hp motor provides the power to maintain the speed necessary for the tough floor cleaning jobs and start up where heavier torque is require–stripping, scrubbing, scraping, grinding, shampooing and bonnet cleaning.
- ONE piece all metal handle housing, tube & trigger assembly
- Safety lock out on handle with easy access thumb action - even with both hands on the handle
- Heavy-duty all steel triple planetary transmission with 3 year warranty
- Ultra high output 1.5 hp motor with lower amp draw for the ultimate in power
- Patented rotational molded housing absorbs vibration and controls torque for easy operator control
|
15 Gal. WET/DRY VACUUM
 |
Nothing is easier than "tip and pour" waste water disposal. Our featured wet/dry vacuum has the capacity and power for large water recovery jobs or dry debris pick-up in the shop or on the job site. It is perfect for hard floor maintenance jobs, recovering floor strippers and hard floor cleaners easily. The swivel hose connector allows 360° hose rotation, letting you move the vacuum without fear of disconnect. This wet/dry vacuum features a two stage filtration process with a washable permanent cloth filter bag that keeps dust from circulating back into the air and a super performance pleated paper cartridge filter for more efficient general application filtration.
- 18 gauge stainless steel for durability
- Durable polyethylene dolly with push handle
- Sound insulated vacuum head unit
- 15 gallon with 114 CFM and 100" water lift
- Complete with accessories
* Shown with optional FM100 24 inch squeegee attachment . ( $119 )
|
Funnel Mouth 4" wide
 |
Our Industrial Grade line of Sprayers is exclusively built to handle the aggressive chemicals and rugged field conditions of the construction industry. All units feature high-grade Viton® seals throughout. Get the job done faster with our wide mouth sprayer. This new sprayer design has a tank opening that is a full 4" in diameter, which allows fast, safe pouring and easy cleaning. A special pressure limiting valve in the pump tube releases pressure over 42 psi for safety.
Specifications:
Type: Hand-held ● Working Capacity: 2 Gallons
Maximum Pressure: 35 psi ● Working Pressure: 10-35 psi
Seals/O-Rings: Viton ● Shipping Weight: 9 lbs
Pump Type: 12" Compression ● Repairable Pump: Yes
Recommended uses:
Curing Compounds: Yes ● Form Release Agents: Yes
Form Oil: Yes ● Diesel: Yes
Oil- based Sealers: Yes ● Water-based Sealers: Yes
Features:
- 20" Brass Wand
- 59" Industrial Hose
- 4½" Wide Mouth
- Plastic/Metal Pump Handle
- Lid Carrying Handle
- Fan Nozzles
- Wand Storage Clips
|
|
|